Refillable cartridges installation

 REFILLABLE CARTRIDGES FOR EPSON CARTRIDGE CODE: 273 AND 277 

Updated 18-Aug-2017 

XP-850 , XP-950 , XP-960 , XP-700 , XP-710 , XP-720 , XP-600 , XP-610 , XP-860 ,..

please Note: 

• Mixing two different brands of ink or cartridges with our refillable cartridges is not recommended  
• We can not cover the new update Firmware for the chipset. Please never Update your Firmware

Step 1: Prepare 1 syringe with a needle, 1 bottle of ink and refillable the cartridges 
(Picture 1).

(Picture 1)

Step 2: Use the syringe with a needle to draw ink from the ink bottle (Picture 2).

(Picture 2)

Step 3: Pull out the rubber plug from the ink filling hole(Picture 3).

(Picture 3)

Step 4: Insert the needle into the ink filling hole(Picture 4).

(Picture 4)

Step 5: Push the plunger for about 20ml so that the ink will flow into the cartridge. (Picture 5) If the cartridge is not full, then repeat the above steps until it is full.(Picture 4/5)

(Picture 5)

Step 6: Please recover the plug in the refilling hole. Pull off the orange bottom protective cover and the yellow label when using it (Picture 6). "
Please note: keep the orange cover for refilling"

(Picture 6)

Video

Please Note: some cartridges comes with clean plugs and some of the with yellow label.