For canon 650/651 , 670/671
Please note: After install the refillable cartridges, never remove the cartridgeuntil printer said that cartridge it's empty.(if you remove it before that massage, printer will confuse.)Same as original cartridges you NEVER change the cartridge(s) when you have "ink is running low massage" with a new original cartridge.
How to remove and re-install the orange cap for
Refillable cartridges for canon printers
Step 1: Prepare 1 syringe with a needle, 1 bottle of ink and refillable the cartridges (Picture 1).
Step 2: Use the syringe with a needle to draw ink from the ink bottle (Picture 2).
Step 3: Pull out the rubber plug from the ink filling hole(Picture 3).
Step 4: Insert the needle into the ink filling hole(Picture 4).
Step 5: Push the plunger for about 20ml so that the ink will flow into the cartridge. (Picture 5) If the cartridge is not full, then repeat the above steps until it is full.(Picture 4/5)
Step 6: Please recover the plug in the refilling hole. Pull off the orange bottom protective cover and the yellow label when using it (Picture 6). "Please note : keep the orange cover for refilling"
Please note: After installing the refillable cartridges, never remove the cartridgeuntil the printer gives a message that the cartridge(s) are empty.(If you remove it before that message, the printer will be confused.)Same with original cartridges you must NEVER change the cartridge(s) when you have "ink is running low message" with a new original cartridge.
"A" Reset point
"B" You can NOT reset the cartridge, you have to wait until the printer has given a message saying "cartridge is empty" (never try to reset the cartridge(s) in this point)
« Go back