Knowledgebase
Back to MIR-AUS > Help Desk > Knowledgebase

Search help:


Removing The 564 Embedded chip

Solution

Do not Bend, Peel or Lift the chip off the cartridges

 

  1. First step is hold the flame of lighter near the chip as shown, Forth across the chip for about 1-2 seconds.
  2. Then carefully pick off the chip, If it does not pick off do it again. 
  3. After you remove the chipset, Placing the chip on CISS cartridges.
    (Use double sided sticky tape)
 
new chipset hp 564
If you get an error when you put the Cartridges in the printer, That says Missing or Damaged.
Wait a few seconds for the message to clear, If it doesn't, don't worry' Just remove the cartridges and re-install them again. Adjust the chip and make sure they are in the right order.
 
 
Was this article helpful? yes / no
Related articles U150 cartridge not recognised error mess
Installing a new battery and reset the chip-set for A+B refillable ink cartridges (code 133-138-140)
Error Code 6502 on Canon printers
The ink cartridges isn't in the order.
Install new updated chip-set for Epson 252 cartridges with battery
Article details
Article ID: 60
Category: CISS for HP printers
Date added: 22/07/2012 22:11:58
Views: 891
Rating (Votes): Article rated 3.5/5.0 (27)

 
« Go back


ink system online shopping
MIR-AUS Pty Ltd
Unit 5/36 O'Riordan Street, Alexandria, NSW 2015 (Sydney/Australia)
Phone: 1300-213-589, +61 02-8065-5614 Fax: +61 02-93103375